GT60 BT OBD2 Diagnostic Scanner – Bluetooth Full-System Tablet (FOXWELL)

Functions

Functions & Capabilities

Full-System Diagnostics

This car diagnostic obd2 scanner allows full-system diagnostics across:

Engine
Transmission
ABS
Airbag / SRS
Steering (SAS)
TPMS
Battery management
DPF system
EPB system
Air conditioning

Functions include:

• Read and clear fault codes
• View ECU information
• Monitor live data
• Turn off warning lights

Injector Coding & Advanced Functions

As a diagnostic tool for injector coding, the GT60 BT supports:

• Injector coding after replacement
• Fuel system calibration
• Engine performance optimisation

Also supports:

• DPF regeneration
• EGR reset
• NOx sensor reset

24+ Service & Reset Functions

The Foxwell GT60 BT supports 24+ commonly used special functions (availability varies by make/model), including:

• Oil Reset – reset oil service interval after changing oil.
• EPB Reset – maintain and reset electronic parking brake system.
• Battery (BMS) Service – register battery replacement, monitor charge state and closed-circuit current.
• DPF Regeneration & Reset – support for DPF regen and component replacement.
• SAS Reset – calibrate steering angle sensor.
• TPMS Reset – manage sensor IDs and test tyre pressure monitoring system.
• ABS Bleeding – bleed ABS system after pump or brake repairs.
• Sunroof Reset – reset sunroof module after repair or communication issues.
• Suspension Reset – reset electronic suspension / air ride height control.
• Gearbox (Transmission) Reset & Learning – reset adaptive values for smoother shifting.
• AFS Headlamp Reset – reset adaptive front lighting system.
• Injector Coding – code injectors after replacement.
• Throttle Adaptation – relearn throttle body position after cleaning or repair.
• Gear Learning – monitor camshaft and crankshaft signals for engine running conditions.
• EGR Reset – reset exhaust gas recirculation system.
• A/F Reset – adapt air/fuel ratio parameters.
• AdBlue/UREA Reset – reset diesel exhaust treatment fluid system after refill.
• Airbag Reset – clear airbag crash data and warning after repair (where supported).
• Coolant Bleeding – activate electronic water pump to bleed cooling system.
• AT Learning – transmission self-learning for better shift quality.
• Language Change – change in-car system language.
• NOx Sensor Reset – reset NOx catalyst learned values.
• KM Reset – adjust odometer data after repair (where legally permitted and supported).
• Seat Calibration – calibrate memory seats after replacement or repair.
• Window Calibration – relearn window limits after battery disconnection or repair.

Note: Not all functions are available on every vehicle. You can check compatibility by sending brand, model, year and engine details.

Bi-Directional Control (Active Tests)

The GT60 BT supports bi-directional control, allowing you not only to read data and codes, but also to command components directly to verify operation.

Examples of active tests include:

• Fuel pump activation
• Fuel injector tests
• Window and door lock operation
• Horn and light activation
• Wiper and headlamp tests
• A/C and fan control

This is essential for confirming whether a fault lies in the sensor/actuator itself or in the control system.

Full OBD2 / EOBD Functions

Supports all standard OBDII modes:

• Request current powertrain data
• Request freeze-frame data
• Read stored emission-related DTCs
• Clear emission-related DTCs
• O2 sensor monitoring test results
• On-board monitoring test results
• Pending emission-related DTCs
• Control tests of systems/components
• Vehicle information (VIN, calibration IDs, etc.)
• Permanent emission-related DTCs